How to repair a corrupted Hard disk drive (for windows users)
How to repair a corrupted Hard disk drive (for windows users)
In this comprehensive YouTube video tutorial, you will learn effective techniques to repair a corrupted hard drive disk. A corrupted hard drive can result in data loss, system instability, and overall poor performance. However, with the right knowledge and tools, you can potentially recover your important files and restore the functionality of your hard drive.
By the end of this video, you will have fixed your hard drive disk and fixed all issues.
- fix you need to format this hard disk
- fix hard disk not showing
- fix hard disk not appearing when plugged
- fix faulty hard drive disk
Content
0.48 -> hey guys welcome to this new video tutorial in
this video I'll show you the easiest way how you
5.94 -> could fix a faulty external hard drive or even an
internal hard drive so if your hard drive keeps
11.7 -> shutting down or being disconnected or not showing
properly and you want to fix it then this video is
16.74 -> for you so first of all for example in this case
I'm plugging an external hard drive here I have it
22.56 -> and it has very very small capacity which is 3.80
giga so what I'm going to do go to your search Tab
31.08 -> and type CMD click run as administrator
Windows will ask you if you really want
37.14 -> to allow the application to make changes to your
device this is a standard message just click yes
43.86 -> as you can see this little window will pop up this
is a Windows command prompt now we are going to
49.8 -> type or you can just copy paste from below the
the the command which I will be typing so CH DS
58.32 -> which means check disk and this command slash F
space and next step we want to check the letter
65.94 -> of my hard disk so here next to my hardest name it
shows the letter d and for example here it shows C
72.66 -> so since I won't prepare this
one the D1 so I will type D
80.82 -> let's do the two dots and hit enter and since it
has very small capacity it should not take very
88.14 -> long time but for example for a hard disk which
has a capacity of 500 Giga or 600 gigahertz will
93.54 -> take much longer and here it shows for example the
message Windows has scanned the file system and
98.76 -> found no problems no further actions is required
I have already fixed this hard disk in the morning
103.92 -> so there is nothing left it's scanned for bad
sectors corrupted and missing file systems so
110.58 -> it was all fixed this morning however for the
other disk with the letter e which is still
116.82 -> running it's showing the following messages for
example here during the scan it has found that
123.48 -> Windows is providing Viola location windows
replaced bat clusters in file blah blah blah
129.54 -> replaced bad cluster Etc and it keeps replacing
and still not completed after almost one hour
136.56 -> of scan so you might see either this version
where there is no bad sectors no bad files
143.16 -> and no missing or corrupted files or you might see
this version where it says that it's repairing the
148.74 -> file systems so all what you need to wait you need
to wait until it's completely done and it should
153.66 -> show hundred percent and after that your hard
disk could be running perfectly without issues
158.7 -> thank you guys for watching and talk
to you soon in a new video tutorial
Source: https://www.youtube.com/watch?v=rMzKTdTMAk4