Fix Epson EcoTank Error E02: 100016 Scanner Error for details see your documentation.
Fix Epson EcoTank Error E02: 100016 Scanner Error for details see your documentation.
เราแก้ไขข้อผิดพลาดเครื่องสแกนของ Espon และแชร์กระบวนการคิดและขั้นตอนการแก้ไขปัญหา
Content
0.86 -> Hey, guys. Kevin here.
2.08 -> Today, we're going to solve a problem
for Epson EcoTank.
5.34 -> The scanner error E-02
and there's a small number underneath, 100016.
11.74 -> You'll find your printer start okay
and at random times,
15.96 -> suddenly, you've got this error.
18.26 -> You also turn off the printer
and you turn it off, turn it back on,
22.12 -> and the error just doesn't go away.
24.7 -> This problem may cause by a couple of things.
28.72 -> When you start a printer, the printer,
it will try to move the scanner unit
35.08 -> to the left and scan a small patch of white
as a signal
41.62 -> that everything works okay.
43.8 -> The printer doesn't have eyes,
so it doesn't know what's going on.
47.24 -> It depends on a couple of sensors.
51.08 -> First thing, you may have something
physically make the scanner unit
55.76 -> not able to move to the left,
including you have a dirty cable,
60.3 -> so there's no power to the unit.
62.32 -> It cannot move or you have something
physically obstruct the pathway
67.9 -> of the scanner and something mechanical.
71.4 -> The next thing is the lamp
might be burnt out.
74.94 -> If you don't see a white light,
that means the lamp
78.6 -> burnt out so it cannot scan the little patch.
81.6 -> The sensor will not be able
to recognize you moving to the left.
86.6 -> Thirdly, you might just have
a really bad motherboard or--
90.36 -> No, it's politically correct.
92.26 -> The mainboard.
94.5 -> For a printer, this new and this clean,
I don't suspect any physical obstruction
100.48 -> for the move path of the scanner.
103.38 -> I'll take it out and I'll clean the cable first.
107.92 -> I hope you can find out it's just a dirty
cable or a misplaced cable.
112.9 -> However, if everything doesn't work out,
115.64 -> you can always find spare parts by go
to bchtechnologies.com,
120.88 -> and then go to the printer parts.
124.76 -> Go to Epson and see
if we have spare parts for you.
129.48 -> ET-2720 is really easy to take apart
and remove the two screws
134.78 -> in front and as on both sides.
140.1 -> Now, you can lift up
the whole scanner unit.
144.4 -> There are three cables
and they're in different sizes,
147.96 -> so don't worry about mix them up.
Just pull them out and clean them.
154.7 -> I'll take a dry cloth, just start cleaning.
160.46 -> If you use a sandpaper,
162.64 -> use a super, superfine,
like a 2,000 grit sandpaper.
166.58 -> Most times, the dry cloth just do the work.
170.16 -> You don't need to go to the sandpaper.
173.9 -> Another thing you can try
is use the rubber eraser.
179.64 -> To insert the cable back,
it's easier to take the side panel off.
185.68 -> Just to go to get a screwdriver or something
to push the tab in and then use your hand.
194.38 -> Just jiggle it and you can take
the whole cover off.
205.88 -> Now, pay attention to which direction
the cable goes in.
209.38 -> From the smallest cable,
213.1 -> you can see the contact points is on the top,
219.6 -> but the medium cable contact points
on the bottom.
222.82 -> For the cable, the smallest cable,
225.3 -> the shining side should be on the top
and the blue side should be on the bottom.
231.92 -> For the medium cable, the blue side
should be on the top and the shining side
237.52 -> should be on the bottom.
244.66 -> Now, we put the bigger cable just like
the two other cables on the side.
249.66 -> There's a sticky double-sided tape
that helps us to stabilize the cables.
257.26 -> Don't put the side cover back yet because
we're going to plug in the power to see it works.
263.94 -> If it doesn't power on because
your bigger cable is not installed correctly,
268.26 -> try to reinstall it.
269.74 -> Now, you can see it can move.
273.7 -> The problem's solved.
276.26 -> Otherwise, you may have to take
the scanner unit apart and see
281.86 -> all the sensors and see
if there's mechanical problems.
287.48 -> Try to use or color copy a page
before you put the side panel back.
293.76 -> Now, we know the scanner is working.
297.16 -> The only problem is it seems
the nozzles are clogged.
302.08 -> We can put the side panel back
and then insert the two screws in the front.
310 -> The unit is ready for some nozzle cleaning.
315.06 -> After that, it's ready to go.
317.1 -> I hope you enjoyed this video.
319 -> Visit us at www.bchtechnologies.com
323.36 -> or locally at Greensboro, North Carolina.
325.82 -> Cheers.
Source: https://www.youtube.com/watch?v=BTKtdRAHLxA