Canon with CIS: Fix P02 E03 Error

Canon with CIS: Fix P02 E03 Error

Canon with CIS: Fix P02 E03 Error

Hello everyone and welcome to today’s video where we’ll be discussing and troubleshooting some common errors that occur with the Canon printer when you have a continuous ink system installed. Have you ever encountered a P02, E02, or E03 error while printing and wondered what went wrong? Well, today we have the solution for you. We’ll be delving into the technicalities of why these errors occur and what you can do to fix them. So sit tight, grab a pen and paper, and let’s get started on troubleshooting these pesky errors!

For other helpful videos, go to    / bchtechnologies  
For printer repair:
🢡 Visit us: BCH Technologies, 506 Radar Road, Suite B, Greensboro, NC 27410.
🢡 Send the printer for repair! https://bchtechnologies.com/printer-r… Yes! We repair DTF, DTG, and sublimation printers too!
🢡 Donate your printer to us! Contact [email protected]

More support options for your printer device are available at https://support.bchtechnologies.com
Continue the Conversation: [email protected]
FACEBOOK: https://www.facebook.com/bchtechnologies
TWITTER: https://twitter.com/BCHTechnologies
INSTAGRAM: https://www.instagram.com/kevinatbch
LINKEDIN: https://www.linkedin.com/company/bcht…
TIKTOK: https://www.tiktok.com/@kevinsinknmore

SHOP NOW: https://bchtechnologies.com

Timeline:
00:00:01 - Kevin explains the problem he will troubleshoot: P02 and E02/E03 errors with a continuous ink system
00:00:36 - Kevin explains that the P03 error can be fixed by moving the ink tank to the front to give more tube to work with
00:01:31 - Kevin concludes that moving the tube to the center of the printer should solve P02 and P03 errors
00:02:14 - Kevin concludes the troubleshooting guide

About BCH: BCH Technologies is an innovative company focusing on ink and related products. Founded in 2011, the company transforms how people and businesses refill their printers through innovative technology solutions. Our core purpose guides the research direction of 1) preventing land waste and 2) bringing customers better products with lower costs. Every day, over one million ink cartridges are thrown into landfills worldwide. The company has focused on working with businesses of different sizes, from Fortune 500 companies to entrepreneurial starters, to develop custom ink, spanning from printer ink to stamp ink, re-entry ink, indelible ink, redaction ink, invisible ink, and more.

This video was produced by Kevin at BCHTechnologies.com.


Content

0.66 -> -Hi, this is Kevin.
1.94 -> Today we're going to troubleshoot a problem P02 and E02 and 03
9.48 -> once you have the continous ink system.
13.66 -> The reason is that the cable is too short
16.02 -> so it can't reach the left side of the printer
20.06 -> if you have a P02 error.
22.94 -> Let's say, this is a perfect printer,
25.02 -> so I'm going to move the cable to the right,
28.2 -> make it shorter on the left and then you'll see what happens.
33.2 -> That's P02 error.
36.78 -> Happily, P03 is you can reach the right side of the printer.
42.28 -> It depends on where your ink tank is.
45.08 -> Maybe you do not have long enough cable.
47.78 -> In that case, you move the tank to the front a little bit
52.62 -> so you give it more tube to work with.
57.94 -> If you're a quality person, you can take the cartridge out
62.22 -> and then you measure 24 centimeters from the base of this clip
69.82 -> and then you mark it with a tape or something.
75.76 -> Here's 24, then you mark it with a tape.
80.24 -> That marker should be about the center of the printer.
84.26 -> Here, a little bit short here,
85.88 -> so we going to move the tube to the center of the printer.
91.78 -> This should solve the P02, P03 errors.
98.86 -> If you got an error E02 or E03,
102.64 -> that's because this cable is too tight and the door cannot be properly closed.
108.38 -> If you look at the door on the left side,
111.58 -> there's poker, that's the door trigger.
117.26 -> If that trigger cannot be fully inserted,
120.72 -> the door is not properly closed
124.6 -> so still you need to a longer cable so we can securely close the door.
134.44 -> I hope this solve your problems. Happy printing.
140.06 -> You come here you don't have a CIS
143.42 -> and those errors is because your cartridge cannot move
148.08 -> to the particular position
149.46 -> and you can think of what happened and then troubleshoot it.

Source: https://www.youtube.com/watch?v=0ygrZVwoxew